KIVRO
472-241-6402 Book a Consultation
Red Dot Best of the Best 2026

A Custom Titanium Wheelchair, Engineered to Your Exact Anatomy

Every KIVRO begins with a millimeter-precise 3D body scan and is additively manufactured in aerospace-grade titanium. The result is a continuous frame with no welds, no brackets, and no standard sizes to adjust around. It starts with one private consultation.

KIVRO custom 3D-printed titanium wheelchair, three-quarter view showing the weld-free frame and red-spoked wheels.

Book Your Private Consultation

Tell us where you are today. A KIVRO specialist will review your needs and outline what a fully bespoke titanium chair would look like for you.

< 6 kg
Frame weight (13.2 lb)
125 kg
Supported load (275 lb)
0 welds
Continuous titanium structure
10+ yrs
Corrosion-resistant service life
Every KIVRO is unique

What others adjust, we design from the ground up.

A conventional chair starts from a base frame and works outward through brackets, shims and adjustment ranges. A KIVRO starts from your scan data.

A standard chair, adjusted to you

  • −Fit approximated from size charts and adjustment ranges
  • −Welded aluminum frames develop fatigue over years of transfers
  • −Bolted seat pans shift, so the original fit drifts
  • −Geometry constrained by what can be mass-produced

A KIVRO, designed around you

  • +Seat dimensions, back angle, camber and center of gravity set from your scan
  • +One continuous titanium structure with no welds and no stress points
  • +Titanium holds its geometry, so the precision fit lasts the life of the chair
  • +Load paths engineered around how you actually propel
The engineering process

Precision engineered from scan to structure

01

3D anatomical body scanning

A high-resolution scan captures your seated posture, alignment and anatomical measurements with millimeter-level precision, replacing approximation-based fitting.

02

Digital frame modeling

Your frame is constructed around your exact scan data. Seat dimensions, back angle, camber and center-of-gravity placement are engineered to your propulsion mechanics.

03

Additive titanium manufacturing

The finalized design is produced through advanced 3D printing in aerospace-grade titanium, allowing structural optimization welded frames cannot achieve.

04

Finishing & fit verification

Each frame undergoes detailed finishing, structural inspection and configuration, with personalized fit verification on delivery.

Titanium frame

Outperforms everything else

Titanium's strength-to-weight ratio allows less material, greater rigidity and uncompromised structural resilience. Natural vibration damping refines ride feedback, while corrosion and fatigue resistance preserve performance over time.

Additive manufacturing removes welds, stress points and geometric limitations. What remains is continuous structure, precision load paths, and integrity that conventional aluminum cannot match.

At a glance
Frame material Aerospace-grade titanium
Manufacturing Additive / 3D printed
Frame weight Under 6 kg
Supported load 125 kg
Design Italian, fully bespoke
Ongoing support Lifetime engineering
Starting configuration $12,400

Final pricing depends on your configuration, fit requirements and performance needs. KIVRO is a private, self-pay acquisition. We do not bill insurance.

Common questions

Before your consultation

How does the KIVRO process work?
Every KIVRO begins with a precise 3D body scan capturing your posture, pressure points and movement. From there we engineer a fully custom titanium frame designed for your body and lifestyle. The process runs consultation, design, fabrication, and final fitting.
What does a fully custom titanium wheelchair cost?
Configurations begin at $12,400 and move up from there depending on your fit requirements, components and performance needs. Because every frame is engineered individually, your specialist will give you an exact figure during the consultation rather than an estimate now.
Do you work with insurance?
No. KIVRO is a private, self-pay acquisition. That is what allows the geometry to be designed entirely around you rather than around what a funding code will approve.
Who is KIVRO designed for?
Active wheelchair users who want the highest level of fit, performance and personalization. They want a chair built entirely around their body, not one adapted from a standard model.
Do you work with clients outside the United States?
Yes. KIVRO works with clients globally. Because each wheelchair is custom-built, we coordinate scanning, logistics and delivery around your location as part of the consultation process.
What happens on the consultation call?
A KIVRO specialist reviews your current chair, what is not working about the fit, and how you propel. You will leave knowing what your configuration would involve, what it would cost, and how scanning and delivery would work for you. There is no obligation.
Begin

Experience precision without compromise

Schedule your private consultation and begin your fully custom titanium mobility experience. One conversation, no obligation, and a clear answer on fit, configuration and timeline.

Request your consultation

A specialist responds within one business day.